Development of the prospectus is an iterative process that lays the foundation for your DPI Project

Development of the prospectus is an iterative process that lays the foundation for your DPI Project

General Requirements:

Development of the prospectus is an iterative process that lays the foundation for your DPI Project. The prospectus will also assist your project chair in providing valuable feedback to guide you in your project development.

Use the following information to ensure successful completion of the assignment:

• Locate and download the most recent version of the prospectus template in the DC Network (). This document has help and criteria information embedded to assist you in the completion of the prospectus.
• Locate “The 10 Strategic Points for the Prospectus, Proposal, and Direct Practice Improvement Project” document (completed in previous courses). You will use information from this document to write the prospectus and attach this document as an appendix in the prospectus.
• Review “Academic Quality Review Checklist (AQR)” (Chapters 1-3 only) for use in writing the prospectus.
• Doctoral learners are required to use APA style for their writing assignments. The APA Style Guide is located in the Student Success Center.
• This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.
• You are required to submit this assignment to LopesWrite. Please refer to the directions in the Student Success Center.

Directions:

Complete a draft of your DPI Project prospectus according to the instructions and criteria provided in each section of the prospectus template. The draft should include information taken from “The 10 Strategic Points for the Prospectus, Proposal, and Direct Practice Improvement Project” document (from previous courses). Use the “Academic Quality Review Checklist (AQR)” (Chapters 1-3 only) to assist you in writing this prospectus. Include the following sections in the prospectus:

1. Introduction: Provide an overview of your project.
2. Background of the Problem: Provide an overview of the history and present state of the problem.
3. Theoretical Foundations: Identify and describe one or two theories or models to be used to inform the project. Identifies the seminal source for each theory or model (a seminal source may be quite old and may be published in a textbook). Illustrate how the theory or model will inform your project.
4. Review of the Literature/Themes: Describe the main and subthemes of your project. You should begin with at least three main themes with three subthemes each. Your literature review will eventually be 30+ pages with over 50 references (85% of these references must be from primary sources that is less than 5 years.
5. Problem Statement: Specify the problem proposed for the project by presenting a clear declarative statement that begins with “It is not known . . . .” Identify the need for the project. Identify the broad population (not the sample) for the project. Describe how this project may contribute to solving the problem.
6. Purpose of the Project: Describe the purpose of this project. Use a declarative statement “The purpose of this project is to . . . .” Describe the methodology and design. Describe the specific population that this project will affect and how this project will contribute to the field.
7. Clinical Questions and Variables: Provide a brief introduction to the question portion. State your clinical questions or PICOT questions. Describe and operationally define each variable of interest.
8. Significance of the Project: Provide an overview of how this project fits with other research in the field. Be specific and relate to other studies. How will this project contribute to the research overall? What is the expected value?
9. Rationale for Methodology: Clearly justify the methods chosen for this project. Ensure the methods align with the project questions or PICOT questions. Describe why this method is the best fit.
10. Nature of the Project Design: Describe the design you have chosen for this project. Discuss why this design is appropriate based on the method chosen and the project questions.
11. Instrumentation or Sources of Data: Describe the sources of data you will use. One source must be a valid and reliable tool, survey, or questionnaire. You may use your discussion question from Topic 3 to assist with this section. Describe in detail all data collection instruments. Describe the validity and reliability of each as appropriate (one mustbe valid and reliable).
12. Data Collection Procedures: Describe step by step how you will collect data. All major steps need to be described. Include a discussion of project sample recruitment, sample selection, and assignment to groups (as applicable). Describe the process of obtaining informed consent, if applicable.
13. Data Analysis Procedures: Begin by describing your demographic data from your participants. How will you analyze this data using descriptive statistics? Restate each project question or PICOT question. For each question, describe in detail what inferential statistics you will use to analyze your data. Include steps to ensure your data meet the assumptions for each inferential statistic used. Describe the a priori alpha level you plan to use.
14. Ethical Considerations: Provide a description of ethical issues related to your project and how you plan to deal with them. Consider your methodology, design, and data collection. Compare to a randomized controlled trial. Address anonymity, confidentiality, privacy, lack of coercion, informed consent, and potential conflicts of interest. Discuss how you plan to adhere to the Belmont Report key principles (respect, justice, beneficence).

Portfolio Practice Hours:

Practice immersion assignments are based on your current course objectives and is application based learning using your real-world practice setting. These assignments earn practice immersion hours and are indicated in the syllabus by a Portfolio Practice Hours statement which reminds you, the learner, to enter in a corresponding case log in Typhon. Actual clock hours are entered, but the average hours associated with each practice immersion assignment is 10.

You are required to complete your assignment using real-world application. Real-world application requires the use of evidence-based data, contemporary theories, and concepts presented in the course. The culmination of your assignment must present a viable application in a current practice setting. For more information on parameters for practice immersion hours, please refer to DNP resources in the DC Network.

To earn portfolio practice hours, enter the following after the references section of your paper:

Practice Hours Completion Statement DNP-830

I, (INSERT NAME), verify that I have completed (NUMBER OF) clock hours in association with the goals and objectives for this assignment. I have also tracked said practice hours in the Typhon Student Tracking System for verification purposes and will be sure that all approvals are in place from my faculty and practice mentor.

ADDITIONAL INSTRUCTIONS FOR THE CLASS

Discussion Questions (DQ)

Initial responses to the DQ should address all components of the questions asked, include a minimum of one scholarly source, and be at least 250 words.

Successful responses are substantive (i.e., add something new to the discussion, engage others in the discussion, well-developed idea) and include at least one scholarly source.

One or two sentence responses, simple statements of agreement or “good post,” and responses that are off-topic will not count as substantive. Substantive responses should be at least 150 words.

I encourage you to incorporate the readings from the week (as applicable) into your responses.

Weekly Participation

Your initial responses to the mandatory DQ do not count toward participation and are graded separately.

In addition to the DQ responses, you must post at least one reply to peers (or me) on three separate days, for a total of three replies.

Participation posts do not require a scholarly source/citation (unless you cite someone else’s work).

Part of your weekly participation includes viewing the weekly announcement and attesting to watching it in the comments. These announcements are made to ensure you understand everything that is due during the week.

APA Format and Writing Quality

Familiarize yourself with APA format and practice using it correctly. It is used for most writing assignments for your degree. Visit the Writing Center in the Student Success Center, under the Resources tab in LoudCloud for APA paper templates, citation examples, tips, etc. Points will be deducted for poor use of APA format or absence of APA format (if required).

Cite all sources of information! When in doubt, cite the source. Paraphrasing also requires a citation.

I highly recommend using the APA Publication Manual, 6th edition.

Use of Direct Quotes

I discourage overutilization of direct quotes in DQs and assignments at the Masters’ level and deduct points accordingly.

As Masters’ level students, it is important that you be able to critically analyze and interpret information from journal articles and other resources. Simply restating someone else’s words does not demonstrate an understanding of the content or critical analysis of the content.

It is best to paraphrase content and cite your source.

LopesWrite Policy

For assignments that need to be submitted to LopesWrite, please be sure you have received your report and Similarity Index (SI) percentage BEFORE you do a “final submit” to me.

Once you have received your report, please review it. This report will show you grammatical, punctuation, and spelling errors that can easily be fixed. Take the extra few minutes to review instead of getting counted off for these mistakes.

Review your similarities. Did you forget to cite something? Did you not paraphrase well enough? Is your paper made up of someone else’s thoughts more than your own?

Visit the Writing Center in the Student Success Center, under the Resources tab in LoudCloud for tips on improving your paper and SI score.

Late Policy

The university’s policy on late assignments is 10% penalty PER DAY LATE. This also applies to late DQ replies.

Please communicate with me if you anticipate having to submit an assignment late. I am happy to be flexible, with advance notice. We may be able to work out an extension based on extenuating circumstances.

If you do not communicate with me before submitting an assignment late, the GCU late policy will be in effect.

I do not accept assignments that are two or more weeks late unless we have worked out an extension.

As per policy, no assignments are accepted after the last day of class. Any assignment submitted after midnight on the last day of class will not be accepted for grading.

Communication

Communication is so very important. There are multiple ways to communicate with me:

Questions to Instructor Forum: This is a great place to ask course content or assignment questions. If you have a question, there is a good chance one of your peers does as well. This is a public forum for the class.

Individual Forum: This is a private forum to ask me questions or send me messages. This will be checked at least once every 24 hours.